Q²M Rotary Heavy Cut 145×25 mm – Foam Polishing Pad

What Is Q²M Rotary Heavy Cut

Q²M Heavy Cut is GYEON's highest-aggression foam polishing pad, engineered for situations where standard correction pads cannot deliver the cutting power required. The 145×25 mm rotary format is the largest and most aggressive configuration in this range — designed to be driven by a rotary polishing machine for maximum material removal on heavily compromised paintwork.

When to Reach for Heavy Cut

This pad is the right choice when the paint surface presents deep single-stage scratches, severe oxidation that has dulled the finish across entire panels, or sanding marks left behind from wet or dry preparation stages. Where lighter correction pads work progressively over multiple passes, the Heavy Cut Rotary delivers aggressive abrasion on the first working passes — reducing cycle time significantly on demanding correction jobs.

Rotary Format and 25 mm Thickness

The 25 mm pad thickness in this variant provides additional foam compression during rotary use, distributing pressure more evenly across the working face and reducing the risk of burning through on panel edges. The 145 mm diameter is optimised for full-panel coverage on bonnets, roofs, doors, and boot lids — making it the preferred choice for complete vehicle correction rather than spot repair.

Important Notes on Paint Compatibility and Finishing

Q²M Heavy Cut is primarily intended for hard paint systems. On softer paint, the level of abrasion this pad delivers may be excessive and should be approached with caution. Following heavy cut correction, the surface will typically require refinement with a lighter finishing or polishing pad to eliminate any haze or micro-marring left by the heavy cut stage before proceeding to degreasing and coating application.